Jumper Cable Adapter Battery Starting Cable Alligator Clamp to EC5 Starting ca-ble car Emergency Star-ting Power Clip Adapter (10 AWG) All Copper Silicone for Prevent Reverse Charge[0.3m/1FT]

[Use methods and steps]: Fit for most car jump portable starters 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle Cautions: Do not reverse the operation sequence of the jump starter. Specifications: Support up to: 18000mAh Power bank at 400Amp Current (<3 seconds) - Input: 12V - Operating temperature: 0°C-60°C Cable Total length:0.3M Material: Metal, Plastic Rated Voltage: 12V-30V Rated Current: 160A Reverse Voltage: 30V (the voltage is less than 20V when the car is starting or the clamps are connected) gauge: 10 AWG Silicone Wire Plug: EC5 Plastic Shell Package Weight: 230g Only applies to 12V 4.0-liter gasoline vehicle or less. [Safety precautions Cautions]: Do not reverse the operation sequence of the jump starter. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage. Do remove the product from the vehicle within 30 seconds after the vehicle started,or it may cause security incidents. Do not connect and/or attach two clamps together, it may cause danger! Package Included: 1 x Alligator Clamp to EC5 starting cable

• [Materials and main parameters]：Wire Guage:10 AWG silicone 0.08/1050 O.D. 5.0 Red Black EC5 Male plastic shell blue, fits 5mm Banana plug. Support up to: 18000mAh Power bank at 600Amp Current (<3 seconds)Input/output: 12V Operating temperature: 0°C-60°C Input/output: 12V Portable charger, Built-in 200Amp Fuse Protection
• [Strong compatibility]: It works with car jump starter This booster cable with clamps is a strong alligator clamp clip with EC5 Plug connector Strong Alligator Clamp Clip with EC5 Plug Connector Fit for most car jump portable starters Jump start cable
• [Safe and reliable design]:Designed with prevent reverse charge module, it is very safe and convenient Special,This booster cable with clamps is a strong alligator clamp clip with EC5 Plug connector.
• [Just plug and play]: Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers It is easy to install and use Just plug and play Jump starter cable is the perfect replacement or spare set of cables.
• [Use methods and steps]: Fit for most car jump portable starters 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle Cautions: Do not reverse the operation sequence of the jump starter.